|Power||Up to 10.000 kW|
|Voltages||Up to 15.000 V|
|Frame||355 ± 1.000|
|Poles||4, 6, 8, 10 and 12|
|Cooling||IC 81W (IC 86W optional)|
|IP||Standard IP 55 (IP 56 optional)|
|Main Applications||Cement, Chemical, Manufacturing processes, Metals, Mining, Power, Pulp and paper, Sugar mill, Water pumping and treatments|
HousingRigid frame, rugged welded steel fabrication (EN 10025 - S235 JR). Frame is provided with side ribs to increase the strength.
Marelli Motori motors for continuous duty operation are designed to meet vibration levels per IEC 60034-14, ISO 10816-1 and BS 5000-3.
ShieldMade of grey cast-iron (EN 1561 – GJL 200) up to 500 frame size motors.
Made of hot-rolled structural steel (EN 10025 – S235 JR) from size 560 and above.
Made in carbon steel (EN 10083 – 2 C40 – TN) up to 450 frame and hot-rolled structural steel from 500 frame (EN 10025 – S355 JR).
Cylindrical shaft with key.
|Main terminal box||
Main terminal boxMounted on side (right or left to be selected).
Made of formable steels EN 10130.
Internal FanMade of aluminum alloy up to 400 frame.
Made of hot-rolled structural steel above (EN 10025 – S235 JR).
EnclosureTEWAC – Totally Enclosed Water to Air Cooled
Cooling SystemIC 81W as per IEC60034-6. Primary fluid (water) is flowing by external water system.
Internal air is flowing by a fan mounted on the shaft of the generator at the driven side.
|Degree of protection||
Degree of protectionStandard IP 55 as per IEC60034-5 (IP 56 optional).
MountingIM B3, V1 and V10 as per IEC60034-7.
Stator/Rotor coreLaminated and enamel-insulated on both sides to minimise eddy-current losses.
The stator winding is made of flat copper or round copper wire depending on the machine size.
The completely wound stator pack is thereby impregnated in an epoxyresin VPI.
The subsequent heat treatment hardens the resin.
RotorSquirrel cage rotor type.
Depending on machine size, the rotor construction is either a solid shaft or welded ribbed shaft.
The rotor winding can be either a pressure die cast aluminum or a copper bar construction.
Antifriction bearings grease lubricated (ball or roller type) or oil lubricated sleeve bearing.
The theoretical lifetime of bearings, L10h according to ISO 281/1 standard, of standard horizontal construction generators, without external forces (radial and / or axial) is in excess of 50.000 hours.
On request, the lifetime of bearings, L10h can be in excess of 100.000 hours.
Locating bearings are on the D end side and floating bearings on the ND end side.
Both bearings are fitted with a regreasing system.
The used grease is removed through a valve locked in the outer bearing cover. Sleeve bearings available as an option.
On request special bearings are designed where high radial and axial forces are applied.
Impregnation systemStator and rotor are VPI treated with an unsaturated polyester amide resin which is polymerisation in oven.
Insulation systemStator: F class insulated with a synthetic enamel.
(H class insulation available on request)
Protective treatmentsDedicated protective enamel is applied on the winding.
The digital transformation of every aspect of our life is a great step forward in terms of opportunities and availability.READ MORE
Our customer is an Italian leading independent energy producer in the market of electricity from clean, renewable and sustainable sources.READ MORE
The General MacArthur will be one of the most efficient and technologically advanced dredges to ever enter the USA dredging market.READ MORE
This is one of the largest investments in the Norwegian shipbuild ing industry in the last century, extremely significant considering the current marine industry outlook.READ MORE
Nr. 20 oil&gas generators MJHV 710 LC4 IP55 (17) / IP56 (3) to equip emergency genset for a new refinery in Kuwait.READ MORE
XL generators specifically manufactured for the hydro power sector the largest electrical machines produced by Marelli Motori.READ MORE