|Model||D5K - D6K - D5R|
|Power||Up to 200 kW|
|Voltages||Up to 690 V|
|Atex protection||Ex d II C T4 Gb|
|Frame||71 ± 315|
|Poles||2, 4, 6, and 8|
|Cooling||IC 411 on request IC 416|
|IP||IP 55 / 56 / 65|
|Enclosure||TEFC – Totally Enclosed Fan Cooled Motors.|
|Main Applications||Centrifugal & reciprocating compressor, Conveyor systems, Cranes, Extruders and expanders, Heat exchangers and blowers, Mills, Mixers, Pumps|
|Atex Protection||Starting||71 to 132 frame||160 to 450 frame|
|Ex d IIC T4 Gb||DOL||D6K||D5K|
|Ex de IIC T4 Gb||DOL||D6Y||D5Y|
CertificateMotors from 71 to 132 frame size are certified by BVI.
Motors from 160 to 315 frame size are certified by CESI.
Ex d/(de) according to IEC/EN 60079-1/60079-7 and ATEX directive 94/9/EC
HousingFrame is made in steel.
(EN 10025-S235 JR)
ShieldMade in cast-iron (EN 1561 – GJL 200 or better for D6 motors)
Made in steel (EN 10025-S235 JR or better for small D5 motors)
Made in carbon steel (EN 10083 – 2 C45)
Cylindrical shaft with key.
|Main terminal box||
Main terminal boxMounted on top.
Made in cast iron. (EN 1561 – GJL 200 or better)
FanMade in thermoplastic reinforced with glass
Cooling SystemIC 411 as per IEC60034-6.
Totally enclosed standard motor, frame surface cooled with fan
4: frame surface cooled
1: self circulation of prymary coolant
1: self circulation of secondary coolant
On request for variable speed application an external ventilation unit can be supplied to get the IC416 cooling type.
|Degree of protection||
Degree of protectionIP 55 as per IEC60034-5. (Available up to IP 65)
Stator/Rotor coreLaminated and enamel-insulated on both sides to minimise eddycurrent losses.
The stator winding is made in flat copper or round copper wire depending on the machine size.
The completely wound stator pack with housing is thereby impregnated in an epoxy-resin VPI.
The subsequent heat treatment hardens the resin.
RotorShort circuit rotor type.
Depending on machine size, the rotor construction is usually a solid shaft type.
The rotor winding can be either a pressure die cast aluminum or a copper bar construction.
Motors are normally fitted with single-row deep groove ball bearings.
Bearings are first greased in the factory with lithium base grease.
The used grease is removed through a valve locked in the outer bearing cover. Sleeve bearings available as an option.
Impregnation systemStator is VPI treated with an unsaturated polyester amide resin which is polymerisation in an oven.
Insulation systemStator: F class insulated with a synthetic enamel.
(H class insulation available on request)
Protective treatmentsSpecific Oil&gas treatment.
VibrationsMechanical vibrations correspond to the limits specified in EN 60034-14 and are certified by the test room.
Rating plateStainless steel, thickness 0,5 mm.
The digital transformation of every aspect of our life is a great step forward in terms of opportunities and availability.READ MORE
Our customer is an Italian leading independent energy producer in the market of electricity from clean, renewable and sustainable sources.READ MORE
The General MacArthur will be one of the most efficient and technologically advanced dredges to ever enter the USA dredging market.READ MORE
This is one of the largest investments in the Norwegian shipbuild ing industry in the last century, extremely significant considering the current marine industry outlook.READ MORE
Nr. 20 oil&gas generators MJHV 710 LC4 IP55 (17) / IP56 (3) to equip emergency genset for a new refinery in Kuwait.READ MORE
XL generators specifically manufactured for the hydro power sector the largest electrical machines produced by Marelli Motori.READ MORE